Compatible with:
Suitable for Toyota Land Cruiser Prado 2009-2017
Suitable for Toyota Prius 2009-2012

Description:
1. Brand new aftermarket Remote Prox key – Includes Battery, Transponder, Circuit Board, Override key.
2. Program the key and cut key blade at a qualified locksmith before using. Check with your local locksmith if they can program prox keys.
3. This is an aftermarket product, condition same as photo, high quality (no logos).
4. Works only with push-button start cars; will not work with ignition key turn.

Features:
High quality material
Meticulously crafted
Includes all electronics and a battery installed
Easy to install

Specifications:
Brand: MAXCOOL
Type: Remote Car Key
Warranty: 1 year
Operating Frequency: 434MHZ
OEM: 271451-5290
Quantity: 1 Piece

Package Include:
1 x Remote Car Key (includes battery)

Important Notice:
Key will need to be cut and programmed by a locksmith or program yourself by following instructions below.
You will need at least one working black key or another remote key.
It will not work with a service grey key.

Remote Programming Steps – Do it yourself:
1. Program remote once received (central locking will work now).
2. Take key to locksmith to cut key to code.
3. Program transponder chip (this will now start car).

Remote Programming Procedure:
1. Open driver side door.
2. Put original key in/out of ignition 2 times.
3. Close and open driver door 2 times.
4. Put original key in/out of ignition once.
5. Shut and open door twice.
6. Close door.
7. Insert key, turn ignition on.
8. Turn ignition off and remove key.
9. Door locks will cycle.
10. Press lock & unlock together for 1 second, then lock button.
(To delete remotes, turn key on/off 5 times, door locks will cycle 5 times. Turn key on then off. Open/shut door).
11. Locks will cycle. Put key in ignition, turn on then off.
12. Remove key, close door, and test remote.

Transponder Chip Programming – Do it yourself:
1. Put original master key in/out of ignition 5 times. Finish with key in ignition.
2. Open and shut door 6 times.
3. Remove original, insert new key.
4. Leave for 60 seconds (or until security light goes out on dashboard).
5. After 60 seconds, security light stops flashing and you can start car.
6. Take key out.
7. Open and shut door.