Compatible with:

Suitable for Toyota Land Cruiser Prado 2009-2017

Suitable for Toyota Prius 2009-2012

Description

1. Listed here is a Brand new aftermarket Remote Prox key – Includes Battery – Transponder – Circuit Board – Override key.

2. Please program the key and cut key blade at qualified Locksmith before using. Check with local Locksmith if they are able to program prox keys.

3. This is an aftermarket product, the product condition is the same as you see on the photo and is of high quality (no logos)

4. This will only work if you push a button to start car – it will not work if you turn a key in the ignition.

Features

High quality material

Meticulously crafted

With all electronics and a battery installed

Easy to install

Specifications

Brand: MAXCOOL

Type: Remote Car Key

Warranty: 1 year

Operating Frequency: 314MHZ

OEM: 271451-5290

Buttons: Lock, Unlock

Package include:

1 x Remote Car Key(includes battery)

Important Notice:
-Key will need to be cut and programmed by either a Locksmith or program yourself by following instructions listed
-You will need to have at least one working either black key or another remote key
-It will not work if you have service grey key

Remote Programming Steps – Do it yourself
3 Easy steps to do it yourself
1- Program remote once received (Central locking will work now)
2- Take key to locksmith shop and get them to cut your key to code
3-Program transponder chip (this will now start car)

Remote Programming Procedure – Do it yourself
1. Open Driver side door
2. Put the Original key in and out of ignition 2 times
3. Close and open driver door 2 times
4.Put Original Key in and out of ignition once
5.Shut and open door twice
6.Close door
7. Insert key Turn ignition on
8Turn ignition off and remove key
9. Door locks will cycle
10.Press lock and unlock together for 1 second then lock button
(To delete remotes turn the key on and off 5 times, door locks will cycle 5 times. Turn the key on then off. Open shut door)
11. Locks will cycle put key in ignition turn to on then off
12.Remove key from ignition, close door and test remote

Transponder chip programming- do it yourself
1. Put Original master key in and out of ignition 5 times. Finish with key in ignition
2. Open and shut door 6 times
3. Remove original, insert new key
4. Leave for 60 seconds (or till Security light goes out on dashboard)
5.After 60 seconds security light stops flashing then you can start car.
6.Take key out
7. Open and shut door

Note:

*Sourced From Professional Aftermarket Manufacturer, QUALITY GUARANTEED.*

Compatible Vehicles