Technical Detail:
1. Latest ELM327 version for greater Ford compatibility
2. Manufactured modification to include a switch to connect to different CAN buses
3. Designed for FORScan software
4. Compatible with software vendors: FORScan, Elmconfig, FF2, FoCCCus, plus more
5. MS CAN bus and HS CAN bus support
6. Drivers and instructions included

Introduction:
One ELM327 OBDII OBD2 USB with switch, designed for communicating with Ford, Mazda, Lincoln, and Mercury vehicles.
With this cable and one of the supported software vendors, you can detect modules not visible to regular OBD2 scanners. This includes showing trouble codes, PIDs, running tests, and service procedures which are never displayed by other OBD2 scanners and a standard ELM327.

Basic Feature:
Reset fault/trouble codes/parameter IDs (PIDs)
Change car configuration data
Run tests
Service procedures
Program certain models

Pin Configurations:
Switch position one: HS CAN – Occupies pins 6 and 14
Switch position two: MS CAN – Occupies pins 3 and 11

Supported Software:
FORScan
Elmconfig
FoCCCus
FF2
Plus more

Modified ELM:
Many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. MS CAN bus is not supported by the stock ELM327 because it is manufacturer-specific and located on non-OBD2 pins. This ELM327 has been modified to implement the MS CAN bus.
ELM327 supports HS CAN from stock, as Ford HS CAN matches OBD2 standards. HS CAN occupies pins 6 and 14, MS CAN bus occupies pins 3 and 11.

Supported Vehicles:
Compatible with all Ford, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector.

Supported Protocols:
FORD HS CAN
FORD MS CAN

Package Including:
1 x ELM327 USB w/Switch
1 x CD Software

Compatible Vehicles